Need help? Call us: +353 028 27666 or info@csltool.com
6
6 items
€1,320.39
Subtotal: €1,320.39
Your order qualifies for free shipping!
Top Offers
€32.62 Original price was: €32.62.€21.86Current price is: €21.86.
€31.90 Original price was: €31.90.€21.37Current price is: €21.37.
€32.62 Original price was: €32.62.€21.86Current price is: €21.86.
€31.90 Original price was: €31.90.€21.37Current price is: €21.37.
€32.62 Original price was: €32.62.€21.86Current price is: €21.86.
Items on sale this week
Top picks this week. Up to 50% off the best selling products.
60/40 Thumb Turn Offset Double 6 Pin Euro Cylinder Nickel Finish (Thumbturn on 60mm)
60/40 Thumb Turn Offset Double 6 Pin Euro Cylinder Brass Finish (Thumbturn on 60mm)
40/60 Thumb Turn Offset Double 6 Pin Euro Cylinder Nickel Finish (Thumbturn on 40mm)
40/60 Thumb Turn Offset Double 6 Pin Euro Cylinder Brass Finish (Thumbturn on 40mm)
50/50 Thumb Turn Double 6 Pin Euro Cylinder Nickel Finish
6
Subtotal: €1,320.39
Your order qualifies for free shipping!
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
Multi Point Locks and Keeps for Single Doors (15)
12Volt Motor for Electronic Opening of Auto-Locking Cyclone Multi-Point Locks
In Stock
Hook Keep Right Hand for Automatic Locking Cyclone Multi-Point Locks
In Stock
Hook Keep Left Hand for Automatic Locking Cyclone Multi-Point Locks
In Stock
Center Keep Right Hand for Automatic Locking Cyclone Multi-Point Locks
In Stock
Center Keep Left Hand for Automatic Locking Cyclone Multi-Point Locks
In Stock
Cyclone Auto Locking Stainless Steel Multi Point Locking System 45mm Backset for Single Door
In Stock
Stainless Steel Shoot Bolt Extension Piece for Cyclone Multi Point Locks
In Stock
Description: Stainless Steel Shoot Bolt Extension Piece for Cyclone Multi Point Locks.
Specification: : Extension connects a shoot bolt to the top of a cyclone multi-point lock for doors with a height exceeding 2100mm. Extensions can be cropped or joined together to accommodate any door length.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : Extension connects a shoot bolt to the top of a cyclone multi-point lock for doors with a height exceeding 2100mm. Extensions can be cropped or joined together to accommodate any door length.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Stainless Steel Shoot Bolt for Cyclone Multi Point Locks
In Stock
Description: Stainless Steel Shoot Bolt for Cyclone Multi Point Locks.
Specification: : Clips on to the top and bottom of Cyclone Multi-Point Locks with 16mm wide face bars to provide additional security and compression with added top and bottom locking when required. Shoot bolt is thrown 18mm into the top and bottom of the door.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : Clips on to the top and bottom of Cyclone Multi-Point Locks with 16mm wide face bars to provide additional security and compression with added top and bottom locking when required. Shoot bolt is thrown 18mm into the top and bottom of the door.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Adjustable Round Single Shoot Bolt Keep
In Stock
Description: Adjustable Round Single Shoot Bolt Keep.
Specification: : Eccentric round shoot bolt keep taps into an 18mm drill hole. Easily adjusted with a quick turn using a 6mm allen key to ensure a tight fit against the weather seal. Originally designed for cyclone multi point locks, this keep has become popular for use with a range of different shoot bolt mechanisms on both door and window locking applications.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : Eccentric round shoot bolt keep taps into an 18mm drill hole. Easily adjusted with a quick turn using a 6mm allen key to ensure a tight fit against the weather seal. Originally designed for cyclone multi point locks, this keep has become popular for use with a range of different shoot bolt mechanisms on both door and window locking applications.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Adjustable Cyclone Single Hook Top or Bottom Keep for Multi Point Lock
In Stock
Description: Adjustable Cyclone Single Hook Top or Bottom Keep for Multi Point Lock.
Specification: : Hook keeps are routered into the door frame (2 per door) to accommodate the tapered hooks on cyclone multi-point locks. The keeps are adjustable +/- 2mm ensuring air tightness against the weatherseal.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : Hook keeps are routered into the door frame (2 per door) to accommodate the tapered hooks on cyclone multi-point locks. The keeps are adjustable +/- 2mm ensuring air tightness against the weatherseal.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Adjustable Cyclone Centre Keep Insert with Latch Plate for 56mm Door
In Stock
Description: Adjustable Cyclone Centre Keep Insert with Latch Plate for 56mm Doors.
Specification: : The Center Keep Insert has a latch plate that is designed to work with 56mm doors. The insert locates into the center keep base section enabling the latch bolt to engage and central deadbolt to lock into the keep. The latch plate is adjustable +/- 2mm ensuring air tightness against the weatherseal. Plates are non-handed, enabling left or right handed door opening.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : The Center Keep Insert has a latch plate that is designed to work with 56mm doors. The insert locates into the center keep base section enabling the latch bolt to engage and central deadbolt to lock into the keep. The latch plate is adjustable +/- 2mm ensuring air tightness against the weatherseal. Plates are non-handed, enabling left or right handed door opening.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Adjustable Cyclone Centre Keep Insert with Latch Plate for 44mm Door
In Stock
Description: Adjustable Cyclone Centre Keep Insert with Latch Plate for 44mm Doors.
Specification: : The Center Keep Insert has a latch plate that is designed to work with 44mm doors. The insert locates into the center keep base section enabling the latch bolt to engage and central deadbolt to lock into the keep. The latch plate is adjustable +/- 2mm ensuring air tightness against the weatherseal. Plates are non-handed, enabling left or right handed door opening.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : The Center Keep Insert has a latch plate that is designed to work with 44mm doors. The insert locates into the center keep base section enabling the latch bolt to engage and central deadbolt to lock into the keep. The latch plate is adjustable +/- 2mm ensuring air tightness against the weatherseal. Plates are non-handed, enabling left or right handed door opening.
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Center Keep Base Section for Cyclone Multi-Point Locks
In Stock
Description: Center Keep Base Section for Cyclone Multi-Point Locks.
Specification: : The Center Keep Base Section is routered into the door frame to accommodate the center dead bolt and latch on cyclone multi-point locks. The base section accommodates a separate latch plate insert, available in different sizes depending on the door thickness (1 x center keep base section and 1 x latch plate insert required per door).
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Add to cart
Specification: : The Center Keep Base Section is routered into the door frame to accommodate the center dead bolt and latch on cyclone multi-point locks. The base section accommodates a separate latch plate insert, available in different sizes depending on the door thickness (1 x center keep base section and 1 x latch plate insert required per door).
Materials:: Manufactured from high quality Steel.
Technical information: Meets the requirements of BS EN 1670:2007 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
image represents product.
Cyclone 2 Hook Stainless Steel Multi Point Locking System 45mm Backset for Single Door
In Stock
Description: Cyclone 2 Hook Stainless Steel Multi Point Locking System 45mm Backset for Single Door.
Specification: : High security stainless multi-point external door lock. Twin bi-directional hooks and 22mm dead bolt throw to prevent unauthorised entry. 16mm Face Plate. 45mm backset from face bar to centre of cylinder. Accepts 92mm centre handles and euro profile cylinders. Split spindle option for security doors (internal opening only). Non-handed with reversible latch bolt.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
For a PDF Document with detailed lock info and ordering informationclick here
image represents product.
Add to cart
Specification: : High security stainless multi-point external door lock. Twin bi-directional hooks and 22mm dead bolt throw to prevent unauthorised entry. 16mm Face Plate. 45mm backset from face bar to centre of cylinder. Accepts 92mm centre handles and euro profile cylinders. Split spindle option for security doors (internal opening only). Non-handed with reversible latch bolt.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
For a PDF Document with detailed lock info and ordering information
image represents product.
Cyclone 2 Hook Stainless Steel Multi Point Locking System 35mm Backset for Single Door
In Stock
Description: Cyclone 2 Hook Stainless Steel Multi Point Locking System 35mm Backset for Single Door.
Specification: : High security stainless multi-point external door lock. Twin bi-directional hooks and 22mm dead bolt throw to prevent unauthorised entry. 16mm Face Plate. 35mm backset from face bar to centre of cylinder. Accepts 92mm centre handles and euro profile cylinders. Split spindle option for security doors (internal opening only). Non-handed with reversible latch bolt.
Materials:: Manufactured from high quality Stainless Steel.
Technical information: Meets the requirements of BS EN 1670:2004 Grade 4 Corrosion Resistance (240 Hours). Endurance tested in excess of 50,000 cycles.
For a PDF Document with detailed lock info and ordering information click here
image represents product.
Add to cart
Archives
Categories
Filter by price
Recently Viewed Products
Box of 5000 18 Gauge Medium Wire Galvanised Staples 6mm Wide 40mm Long
In Stock
Application: Ideal staples for craftwork, cabinet making, joinery and furniture.
Tools: For use with 18 Gauge L type Staplers,
including Senco, Paslode, Bostitch, etc.
Packaging: This product is supplied in packs of 5000 Staples.
See listing below for available lengths for this staple type.
image represents product.
Add to cart
Tools: For use with 18 Gauge L type Staplers,
including Senco, Paslode, Bostitch, etc.
Packaging: This product is supplied in packs of 5000 Staples.
See listing below for available lengths for this staple type.
image represents product.
7 pcs. Multiprofile Set D with 120mm Dia. 50mm Bore Head with Limiters 693.013.06
In Stock
Application: 7pcs. Set D with limiters, contains a tongue and groove set, a bullnose set with counter profile and a splayed set.
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives and Limiters can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Add to cart
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives and Limiters can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
13 pcs. Multiprofile Set B with 120mm Dia. 50mm Bore Head without Limiters 692.013.08
In Stock
Application: 13pcs. Set B contains a series of popular moulding sets ideal for machining any number of wood profiles.
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Add to cart
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Premium Quality Aluminium Oxide Abrasive Roll 115mm x 50mtr. Grit 120
In Stock
Application: For hand sanding of solid wood, mdf, plastics and other materials - ideal for preparing components for paint or lacquer.
Machines: Cut from roll to use on hand held finish sanders.
Materials: Solid wood and wood based materials, plastics, veneered boards and primed components.
See listing below for all grits available for this sandpaper type.
Made in Switzerland.
image represents product group.
Add to cart
Machines: Cut from roll to use on hand held finish sanders.
Materials: Solid wood and wood based materials, plastics, veneered boards and primed components.
See listing below for all grits available for this sandpaper type.
Made in Switzerland.
image represents product group.
7 pcs. Multiprofile Set C with 100mm Dia. 30mm Bore Head with Limiters 693.013.01
In Stock
Application: 7pcs. Set C with limiters, for producing solid wood doors with 2 door profile cutter sets, a raised panel set and an external edge moulding set.
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives and Limiters can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Add to cart
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives and Limiters can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Join our newsletter for £10 offs
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!
Völogi deledes ponade eujäjurtad
Autoseligen syr. Nek diarask fröbomba. Nör antipol kynoda nynat. Pressa fåmoska. Aposkop redelingar nede, sektigt.
Need Help?
- -5% for all order in this week Shop now
- Free delivery for all orders over $200














