Need help? Call us: +353 028 27666 or info@csltool.com
Top Offers
€32.62 Original price was: €32.62.€21.86Current price is: €21.86.
€31.90 Original price was: €31.90.€21.37Current price is: €21.37.
€32.62 Original price was: €32.62.€21.86Current price is: €21.86.
€31.90 Original price was: €31.90.€21.37Current price is: €21.37.
€32.62 Original price was: €32.62.€21.86Current price is: €21.86.
Items on sale this week
Top picks this week. Up to 50% off the best selling products.
60/40 Thumb Turn Offset Double 6 Pin Euro Cylinder Nickel Finish (Thumbturn on 60mm)
60/40 Thumb Turn Offset Double 6 Pin Euro Cylinder Brass Finish (Thumbturn on 60mm)
40/60 Thumb Turn Offset Double 6 Pin Euro Cylinder Nickel Finish (Thumbturn on 40mm)
40/60 Thumb Turn Offset Double 6 Pin Euro Cylinder Brass Finish (Thumbturn on 40mm)
50/50 Thumb Turn Double 6 Pin Euro Cylinder Nickel Finish
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
“1″ (25.4mm) Japanese Mortice Chisel and Bit Set” has been added to your cart. View cart
Hollow Square Mortise Chisels & Bits (11)
1″ (25.4mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
3/4″ (19.05mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
5/8″ (16mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
1/2″ (12.7mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
3/8″ (9.5mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
5/16″ (8mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
1/4″ (6.35mm) Replacement Bit (Auger) for Japanese Mortice Chisel
In Stock
Application: Replacement bit (auger) for Japanese mortice chisel.
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with brad point and excellent chip ejection.
Made in Japan
See listing below for all sizes available for this product type.
1″ (25.4mm) Japanese Mortice Chisel and Bit Set
In Stock
Application: Use for Square Morticing Softwoods and Hardwoods.
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
3/4″ (19.05mm) Japanese Mortice Chisel and Bit Set
In Stock
Application: Use for Square Morticing Softwoods and Hardwoods.
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
5/8″ (16mm) Japanese Mortice Chisel and Bit Set
In Stock
Application: Use for Square Morticing Softwoods and Hardwoods.
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
5/16″ (8mm) Japanese Mortice Chisel and Bit Set
In Stock
Application: Use for Square Morticing Softwoods and Hardwoods.
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
Add to cart
Features: Manufactured from best quality Japanese steel with relieved inside corners for stress-free clean morticing.
Machines: Chisels fit most inductrial morticers including Sedgwick, Wadkin, Dominion, etc.
Made in Japan
See listing below for all sizes available for this product type.
Archives
Categories
Filter by price
Recently Viewed Products
13 pcs. Multiprofile Set B with 78mm Dia. 19.05mm Bore Head without Limiters 692.013.12
In Stock
Application: 13pcs. Set B contains a series of popular moulding sets ideal for machining any number of wood profiles.
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Add to cart
Machines: For use primarily on spindle moulders but can also be used on cnc routers with the appropriate arbor.
Materials: Use on hardwoods, softwoods and plywood.
See listing below for all sizes available for this cutter head type.
Additional 40mm and 50mm Knives can be puchased in the Universal Knives and Limiters Section.
For Spare Parts select product from list and Click spare parts tab.
image represents product group.
Box of 10 Reversable Carbide Knives 25 x 12 x 1.5mm with 2 Cutting Edges
In Stock
Application: For Cutting MDF, Chipboard, Hardwood and Softwoods.
Tools: For Spindle and Routing Tools with indexable Knives.
Packaging: This product is supplied in packs of 10 knives.
Made in Germany
Add to cart
Tools: For Spindle and Routing Tools with indexable Knives.
Packaging: This product is supplied in packs of 10 knives.
Made in Germany
6 meter length of 80mm Flexible Polyurethane Ducting for Dust Extraction
In Stock
Application: Flexible polyurethane ducting with 80mm inside diameter for transferring dust and shavings from woodworking machines.
Features: Transparent, strong and flexible with a high resistance to abrasion.
Materials: Ester based polyurethane with coppered spiral for earthing.
Packaging: This product is sold in 6 meter coils.
See listing below for all diameters available for this product type.
Add to cart
Features: Transparent, strong and flexible with a high resistance to abrasion.
Materials: Ester based polyurethane with coppered spiral for earthing.
Packaging: This product is sold in 6 meter coils.
See listing below for all diameters available for this product type.
Box of 100 Velcro Backed 150mm Diameter 240 Grit Lubricated 9 Hole Sanding Discs
In Stock
Application: For fine sanding of solid wood, mdf and other components. Ideal for denibbing between coats of paint or lacquer with finer grits.
Machines: For use on Festool 150mm orbital sanders with 9 hole pads for dust extraction.
Materials: Solid wood, MDF, veneered panels, etc.
See listing below for all grits available for this disc type.
If required grit is not on the list click here for quotation template click here
image represents product group.
Add to cart
Machines: For use on Festool 150mm orbital sanders with 9 hole pads for dust extraction.
Materials: Solid wood, MDF, veneered panels, etc.
See listing below for all grits available for this disc type.
If required grit is not on the list click here for quotation template click here
image represents product group.
Pair of Universal Profile Limiters 40 x 4mm 691.017
In Stock
Features: - Alloyed Tool Steel Limiter.
- 40mm Height x 4mm Thickness.
- For use on Universal Blocks with Limiters.
- Limiters are supplied in Pairs.
Add to cart
- 40mm Height x 4mm Thickness.
- For use on Universal Blocks with Limiters.
- Limiters are supplied in Pairs.
Warning: Limiters must be used when feeding workpiece manually.See listing below for all profiles available for this Limiter type.
For a PDF Document Showing all 30 Knives on this page click hereimage represents product.
Join our newsletter for £10 offs
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!
Völogi deledes ponade eujäjurtad
Autoseligen syr. Nek diarask fröbomba. Nör antipol kynoda nynat. Pressa fåmoska. Aposkop redelingar nede, sektigt.
Need Help?
- -5% for all order in this week Shop now
- Free delivery for all orders over $200
Copyright 2025 © Partdo WordPress Theme. All right reserved. Powered by KLBTheme.
Download App on Mobile
